A multi-purpose belay device with a compact design, suitable for use with half, double and single ropes for mountaineering, multi-pitch sport climbing and traditional routes. The intuitive and easy-to-use BE UP belay has a modular braking system that optimizes braking with all types of ropes and allows automatic blocking and independent attachment of two climbers.
Parameters, certification and legislation
- Used for 7.3-9.0mm diameter double or half dynamic ropes.
- 8.5-10.5mm diameter single dynamic for rope.
- The belay body is hot-forged from light alloy - light and highly functional for best performance.
- The body part is an eye for attachment to the rack when a climber is supported in GUIDE mode.
- The belay part is a plastic-coated steel cable that eliminates excessive movement of the belay device during tensioning and makes it easy to handle so you don't accidentally drop it. down the safety device.
- Weight of the safety device. unique safety device: 85 g
- REGISTERED DESIGN.Conforms to EN 15151-2:2012 type 4
- UIAA
- 100% quality control
- Made in Italy
BE UP features
- Effective protection of the first climber. The special shape of the BE UP belay allows the rope to be fed smoothly and does not get stuck, even if it needs to be fed quickly, e.g. when your climbing partner clicks on the belay.
- When first attached. climbing multi-length routes with double rope, BE UP feeds one rope while the other rope is blocked.
- Effective modular rope braking: “V”-shaped grooves are specially designed to provide better braking control when arresting a fall, descending or retrieving co-climbers.
- Allows a second or two co-climbers to be picked up independently. When the second climber falls, the belay is automatically blocked. If two are attached, one can be protected even if the other is sitting in the rope and is stuck in the rope.
- BE UP is equipped with a release eye, which is used for release. the rope or to lower the second climber sitting on the rope. To release the rope, simply lift the belay using the HMS carabiner placed in the release eye.
- Enables a quick switch from retrieving mode to first climbing support mode.
- During descent, the ropes stay separate and do not get tangled, and the "V"-shaped grooves allow the lowering speed to be easily controlled.
