Climbing Technology Cric

Multifunctional rope blocker with built-in disc for climbing, work at height and rescue. Robust, practical and intuitive. It has four different operating modes: output mode, single pulley mode, rope blocker/pulley mode or pulley mode with blocker to pull the load.

• Versatility, compact size and easy handling, rope maneuvers are shortened to minimize time, material and space.
• Enables rope climbing in accordance with EN 567 / EN 12841-B standards (climbing mode).
• A simple pulley can be used to lift or transport a load according to EN 12278 (pulley mode).
• An integrated pulley with ball bearings can be used as a simple diversion that facilitates rope climbing or lifting people without the need for additional fasteners (rope blocking mode /pulley).
• Allows loads direct lifting, the creation of traction systems, and the rescue or self-defense of a person if, for example, he falls into a crack (traction pulley mode with blocker).
• In pulley mode, the rope can be moved freely in both directions. Conversely, when using the pulley mode with a blocker, the rope can only run in one direction and is blocked in the opposite direction.
• When using the pulley mode with a blocker, it is possible to lower the lifted load with the help of a special line connected to a cam inside the device.
• Easy opening with an intuitive release button allows the device to be quickly attached to the rope - regardless of what mode to use. Even with gloves or in difficult conditions.
• Equipped with steel cam teeth that minimize rope wear but effectively block it. In addition, the cam is designed with two grooves to reduce the accumulation of dirt, so the rope lock is very effective in any conditions (mud, frozen rope, etc.).

This device is not suitable for fall arrest (EN 353-2 / EN 12841-A) or self-restraint during climbing.

Parameters, certificates and legislation

Patent pending

Weight: 150 g

UIAA

CE 0333

Made in Italy

EN 567:2013 for 8-12 mm diameter ropes

EN 12841:2006-B 10-12 mm diameter for ropes

EN 12278:2007 for ropes with a maximum diameter of 13 mm